Tag: heron

Don’t Fool with Mother Nature

Years ago, there was a commercial with the tag line “Don’t Fool with Mother Nature”. This weekend, I was reminded of such. After weeks of catching fish, seemingly at will, Mother Nature reminded me who the boss really was. Unusually warm weather and full moon tides confused fish and anglers alike. All weekend long, the things that were biting the most were Gnats.

It was not particularly difficult to locate fish, especially Trout. Using the depth sounder, we could clearly see the Trout holding on channel ledges in 15 to 20 feet of water. Getting them to bite was the real challenge. Each time we located a school, we would get a couple Trout to bite. However, the bulk of the fish were not eating. Downsizing our lures and slowing our retrieve cadence helped to get more strikes. Z-Man TRD TubeZ (PB&J) and TRD (Bubblegum) were the most productive lures. Given the strong full moon tides, we fished the lures on 1/5 ounce NedlockZ jigs. At times, when the current was really strong, we resorted to quarter ounce jigs. I never use quarter ounce jigs. Thankfully, we found one pack in the bottom of my tackle box.

After a tough day on Saturday, I called several friends. All reported similar results. We thought we would easily catch 50 to 100 fish and struggled to release 20. I keep telling myself, that catching 20 fish is not bad. But, after the hot bite we have enjoyed for the past several weeks, it sure feels like it.

Hopefully, Mother Nature is done teaching me a lesson.

Thanksgiving Week Fishing

Thanksgiving week was all about family, food and fishing.   When I was not eating, I was fishing with my family.  The bite was good all week if you adjusted your techniques to match the weather conditions.

Early in the week, the weather was warm and the barometer was steady.  My niece, Sarah, did great sight fishing Redfish in the shallows.

The next day, a cold front passed through bringing with it a light rain and cooler temperatures.  The falling barometer had the Trout feeding actively.  My brother in law (Mike) and nephew (Lee) released over 100 fish casting Z-Man StreakZ 3.75 on Finesse Jigs.

The next day brought blue skies and post cold front conditions.  My brother (Dave) and son (Elliott) doubled up On the Fly with a couple of nice Redfish.  The water was very clear and the fish were very easy to see.

Today, my wife (Amy) and I got out of the skiff to enjoy the perfect weather.  After a picnic lunch, we released a bunch of small Trout.  Post cold front had the Trout in deeper about (10-15 feet).  Once located, vertical jigging a Z-Man TubeZ on NedlockZ jig kept us in steady action.

Fishing with Friends

Yesterday, I fished with my old friend and longtime fishing buddy Ben.  Back in the day, when I used to guide, Ben was one of my favorite fishing clients.  Now, we are good friends that like to fish together.

Ben got this one on a Z-Man StreakZ 3.75 (Blue Back Herring) on a Finesse jig.  When I get to be Ben’s age, I hope I can fish like he does!

 

Rigged and Ready

Salt Marsh Heron 

Over the past few weeks, I have fished the Heron in a variety of conditions.  From super shallow on calm days to submerged ledges in a nasty chop, in all situations, the skiff performed flawlessly.  Thus, I declare the new skiff Rigged and Ready to Roll!

Finesse Techniques Producing Fishing

Yesterday, was windy and cold.  Post cold front conditions made producing fish a bit of a challenge.  However, by using my fish finder to locate Trout holding on a ledge in 10 feet of water and vertical jigging a Z-Man TubeZ on a NedlockZ jig, I put together a pretty good day.  The bite was very light and it took a good bit of concentration to feel it.  On days like yesterday, a light and sensitive tackle system made a big difference.

As winter approaches, post cold front conditions will become the norm.  If you want to consistently catch fish in the winter, I recommend finesse!

 

First Cold Front of the Season

 

Cold and Windy Trout On the Fly

This week, one of the first cold fronts of the season passed through the Lowcountry. Leaving behind, strong northeasterly winds and lower water temperatures. These conditions are a mixed blessing for anglers. When the wind is blowing against the tide, the Wando River can be downright nasty. However, anglers willing to brave the rough conditions will often find ravenous schools of Trout and Redfish.

On Friday and Saturday, the nasty conditions kept me off the water. On Sunday, conditions were not much better but Elliott and I decided to go fishing anyway. The Wando River was rough but my new skiff handled the chop extremely well. After a short run up river, Elliott and I began fishing on a shallow flat with a slight channel running through it. I cast a Z-Man TRD TubeZ on a 1/5 ounce NedlockZ jig into the channel and erratically hopped the lure back to the boat. Halfway through my retrieve, a Redfish crushed the lure. While I was fighting the fish, Elliott staked the skiff with the Power Pole Micro and fired a cast into the channel. He hooked a Redfish as well. We released our fish and then immediately caught two more. After releasing the second set of fish, we decided to put away the spinning tackle and switch to flyrods. Given the strong breeze, casting was a bit of a challenge. It took me a few tries but I eventually made a long cast into the channel. The fly, a chartreuse Clouser Minnow, was eaten immediately. Elliott and I figured it was another Redfish but when it came to the skiff it was a nice size Trout.

We continued to work the channel with our flyrods and enjoyed steady action with Trout and Redfish. The fish were still biting when a strong gust of wind caught my front cast and the fly hit me in the arm. Good thing the fly was tied on a barbless hook. It came right out and only hurt a little bit. Just enough to convince me it was time to stop fly-fishing.

Conditions on Sunday were not optimal but Elliott and I managed to catch a good number of fish. I even caught myself!

Day One on the Heron

Salt Marsh Redfish

Elliott stopped poling long enough to get a few of these

Got this guy on the first cast from the Heron!

Day number one on the Salt Marsh Heron was simply epic.  The wind was calm and the water was clear.  Perfect conditions to try out the new skiff.  Right away, the Heron exceeded my expectations.  It was easy to pole, floated shallow and extremely quiet.  Elliott poled me within 30 feet of the first school of Redfish we encountered.  The Reds did not seem to know we were there.  It was cool to watch them track the fly and see the strike.  We caught several fish and watched each one eat the fly.  The longest cast we had to make all day was 30 feet.  Fishing from the Heron will be up close and personal.  Just the way I like it!

The Heron performed well with the Etec 60.  Cruise at 4000 RPMs  was 25 MPH.  The highest RPM I hit today was 4800 and the GPS speed was 30 MPH.  So, the skiff has plenty of speed for my purposes.

It was flat calm today.  So, I did not get a chance to try the skiff in choppy conditions.  However, with winter coming, there will be plenty of time for that.

When the tide got into the marsh, Elliott and I switched our attention to Trout.  We made a quick run to a submerged ledge in about 10 feet of water.  I deployed the Minn Kota 55# thrust trolling motor and it easily pulled the skiff against the tide.  We cast Z-Man Trick ShotZ on NedlockZ 1/5 ounce jigs into the current and bounced them along the ledge.  They never bounced very far.  Trout pounced on the Trick ShotZ soon as it hit the bottom.  Strong Trout bite today.

Day number one is in the books.  It was a day to remember.  Very happy that my son, Elliott, was there to share it with me.

 

New Skiff Coming Together

The team at Salt Marsh Skiffs is building my new skiff (a Heron 16).  In a few weeks, I hope to have it in the Lowcountry.  Just in time for some fantastic Fall fishing.  Really looking forward to stalking winter schools of Redfish On the Fly.  Being light, with a shallow draft and very quiet, the Heron is an excellent platform for this style of fishing.

Stayed tuned for more updates.